PROMO: is here

Ranked Top 5% of Toronto companies

Stone Repair Toronto, Measured Before We Price It

Cracked, loose, or sunken stone can let in water and turn a walk into a trip hazard. We assess steps, porches, patios, walkways, and exterior stonework in Toronto and across the GTA. An on-site laser measurement comes before an itemized estimate, because a phone quote cannot show whether the problem is a joint, bedding, drainage, or movement below.

Customer Satisfaction Rate
0 %

Built on trust and quality.

100%

Trusted by Toronto Homeowners & Builders Since 2010

Repair work for exposed stone

We inspect damaged stone on entrance steps, porches, patios, walkways, and veneer before recommending a scope. We identify what can stay, what needs resetting or replacing, and what is excluded. Stone is supplied and custom cut by our suppliers to site measurements. We protect nearby planting, remove old material, and clear the waste when the work is complete.

Repair only what has failed

A cracked joint may need repointing. A rocking flagstone may need to come up so the bedding below can be addressed. We explain the difference before pricing.

Match is discussed on site

Replacement stone and mortar cannot be made identical to aged material. We show where a repair will sit and aim to match the existing work as closely as practical.

Weather decides exterior timing

Toronto freeze-thaw and wet conditions affect exterior mortar work. We give an approximate installation date based on material availability, weather, and the type of repair.

Point At the Stone Repair You Need

You may know what is wrong before you know the repair term for it. Pick the signs that match what you are seeing, then tell us where and when it started. Antex will measure the work on site and bring the price to the actual job.

ShapeNot picked
FixingNot picked
GlassNot picked
HandrailNot picked
Get a Free Quote

Five ways damaged stone gets worse

A loose step, crumbling joint, or sinking patio often has more than one cause. The visible break may be small while water or failed bedding sits behind it. These are the risks we check on site, with a matching response for each one.

How we address it

We inspect before choosing the repair

We assess the stone, joints, and visible movement at the visit. If a stone must be lifted and reset rather than pointed over, that goes into the recommended scope.

The estimate names the work

Our itemized estimate separates materials and labour and is valid for two weeks. The price changes only when you change the scope or materials, with no hidden charges.

We set expectations for the match

We review the existing material and the proposed replacement area with you. Stone is supplied and custom cut by our suppliers, so availability can affect the closest practical match.

We look for the water path

We check the damaged area for signs that water is entering joints or collecting near the house. Where applicable, we confirm the relevant Ontario Building Code requirement on site.

We protect and clean the site

Floors and planting are covered while we work, dust is kept down, and old material and waste are removed. We also discuss access to the affected steps or walkway before starting.

Five ways damaged stone gets worse

The repair covers the cause

Mortar over a loose stone can hide movement for a while. When water remains below, another freeze-thaw cycle can open the same area again.

The scope is too vague

A quote that says only stonework repair leaves room for disagreement over stones, joints, bedding, waste, and the work around the damaged area.

Replacement looks out of place

Older stone has weathered, and mortar changes colour over time. A new piece may stand out if its location and practical match are not discussed first.

Water keeps reaching the damage

Snowmelt and heavy rain can enter open joints or sit beneath a surface. In Toronto, repeated freezing and thawing can lift stone and crack mortar.

The entrance is left in disorder

Dust, broken mortar, and removed stone can affect planting and access. An unsafe step or walkway also needs a clear plan while work is underway.

Services

Repair options for exterior stone

The right scope depends on whether the damage is limited to a joint, a few loose pieces, or a base that has moved. We assess the area and access on site, including narrow side yards and rear-yard material routes. Toronto snowmelt, road salt, and freeze-thaw exposure shape the method and timing for exterior repairs.

Flagstone reset and joint repair

For flagstones that rock, sink, or have open joints. Flagstone repair can address a damaged section without assuming the whole patio must be replaced.

Stone step and stair repair

For cracked, loose, or separating entrance pieces. Stone step repair starts with the condition of the step and the material below it.

Porch and walkway repairs

For worn joints, shifted stone, and localized surface damage. The scope identifies the affected section so you can compare repair with broader replacement.

Stone veneer and mortar repair

For cracked mortar or loose exterior facing stone. Marble repair and granite repairs need an on-site look because the material and failure location change the approach.

Foundation stone assessment

For visible damage around stone foundation areas. If you need to fix stone foundation damage, we inspect the accessible stone and explain the repair scope before pricing.

How a Toronto stone repair is handled

We begin at the damaged area, not with a replacement pitch. Your project manager laser-measures the site, reviews access, and explains what appears to have failed. Within one to two business days, you receive an itemized estimate with materials and labour split out. Nothing is ordered until you approve it. Stone is supplied and custom cut by our suppliers to the measurements needed for the repair. We provide an approximate installation date and a written timeline where one applies. During the work, nearby floors and planting are covered, dust is kept down, and removed material is carted away. You receive a progress update at the end of each working day, and we call if a date moves. The job ends with a final walkthrough before the remaining 10% payment is due.

Assess, measure, then price

We inspect the failed area and measure on site before recommending repair or replacement. That gives you a scope based on the actual condition, not a photo or phone guess.

Supply to the repair scope

Once approved, our suppliers provide stone custom cut to the needed measurements. Material availability and exterior weather affect lead time, so we keep you updated.

Reset, clean, and walk through

We complete the agreed work, remove waste, and check the finished area with you. The final walkthrough happens before the remaining balance is paid.

Projects

Repairs That Show What Changed

These completed stone repair projects show the symptoms homeowners brought to us, the exterior surfaces involved, and when the problem became apparent. Each card records the choices behind a practical repair for Toronto's wet, freeze-thaw conditions.

Reset Flagstone Patio After Winter

A settled patio area was lifted and reset to remove trip points and restore a continuous walking surface.

  • Low spots had collected snowmelt beside the patio.
  • The repaired area was reset to meet surrounding stones.
  • Suited to patios with localized settlement.

Testimonials

Stone Repair Reviews from Toronto Homeowners

Clear communication and careful site checks made the repair straightforward from start to finish.

0 %
Client Satisfaction
0 +
Projects Completed

Wonderful experience. Antex team installed our glass shower enclosure and it looks great. Service was fast without sacrificing quality.

James R Property Developer
WHY WE ARE DIFFERENT

Specific scope beats a vague promise

Anyone can hang a panel of glass. Antex is different in four ways that show up on your invoice, your calendar, and your final inspection.

We find the failed area

We inspect visible stone, joints, and movement before recommending a repair. That helps separate a localized issue from work that may need a broader scope.

Assessment

The estimate is itemized

Materials and labour are split out and the estimate is valid for two weeks. It moves only if the scope or materials change.

Pricing
One contact stays on it

One dedicated point of contact manages your job from the first visit to the final walkthrough. You receive daily updates while the project is running.

Communication
Labour coverage is written down

Installation labour is covered by a written workmanship warranty in the Construction Agreement. Manufacturer warranties on supplied materials are passed through.

Warranty
How We Work

From damaged stone to a safe finished surface

You should know what is being repaired, when work is expected, and what changes if the site reveals a different condition. Our process keeps the scope visible from the first visit through cleanup and handover, without asking you to decide at the door.

1

Inspect and quote

Your project manager visits, laser-measures the damaged area, and reviews access and visible conditions. We send an itemized estimate within one to two business days. It covers materials and labour, remains valid for two weeks, and no material is ordered until you approve it.

2

Confirm supply and timing

After approval, we arrange stone supplied and custom cut by our suppliers for the repair scope. We provide an approximate installation date, plus a written timeline where one applies. Exterior work depends on material availability and weather, and we call when the date moves.

3

Repair and hand over

We cover nearby floors and planting, keep dust down, and remove old material and waste. The project manager checks the completed work and walks the area with you. The remaining 10% payment is due after that final walkthrough, not before.

Book Stone Repair Toronto after an on-site assessment

Send photos of the cracked, loose, or sunken area, then arrange a free on-site measurement in Toronto or across the GTA. We'll inspect what is accessible, explain repair versus replacement, and send an itemized estimate within one to two business days. There's nothing to sign at the visit, and nothing is ordered until you approve the scope.