PROMO: is here

Ranked Top 5% of Toronto companies

Concrete Demolition Toronto, measured before it's priced

A cracked porch, heaved walk or failed slab can be unsafe and can hold up the work that follows. We visit Toronto and GTA properties to measure the area, check access and set demolition limits. You receive an itemized estimate with labour and materials split out, because a phone price can't show thickness, rebar, buried rubble or the route for waste.

Customer Satisfaction Rate
0 %

Built on trust and quality.

100%

Trusted by Toronto Homeowners & Builders Since 2010

Concrete demolition for problem areas

Concrete removal can clear a failed porch, steps, walkway, patio or slab before replacement work begins. We assess the area and access on site, confirm what stays, then set the removal and cleanup scope. Excavation is delivered through Antex subcontractors under our project management, with waste removed after the work.

Remove only what needs to go

A damaged section may not require the whole surface to come out. The site visit defines the break line and the surfaces to protect before work is priced.

Access is part of the scope

Toronto side yards, fences and rear access can change how debris leaves the property. We look at the route before quoting, rather than adding access questions after work starts.

Plan around thaw and wet ground

Freeze-thaw damage and spring melt can expose movement below a slab. Weather and job type decide the work window, and an approximate installation date is provided when one applies.

Point At the Concrete Demolition You Need

Most people know what needs to come out before they know the right demolition term. Pick the description that matches what you are seeing, and Antex will visit, measure the work and bring the price back to the actual job.

ShapeNot picked
FixingNot picked
GlassNot picked
HandrailNot picked
Get a Free Quote

Five concrete demolition risks to avoid

A broken slab can look straightforward until the crew starts breaking it. Homeowners need to know what remains, where waste goes and what could change the scope. Each risk below has a matching process step.

How we control it

Mark the removal limits on site

Your project manager measures the area and confirms what is being removed and what stays protected. We confirm applicable Ontario Building Code requirements on site where they apply.

Price the visible scope clearly

The itemized estimate separates labour and materials and is valid for two weeks. The price changes only if the scope or materials change, with no hidden charges.

Check the access route first

We assess equipment and waste access during the visit, including the route through a side yard or to the rear. Excavation is managed through Antex subcontractors when it is part of the work.

Cover nearby surfaces and planting

Floors, walls and planting are covered while work is underway, and dust is kept down. Your dedicated contact provides an update at the end of each working day.

Remove waste before handover

Old material is removed and waste is carted away. The project manager completes a final walkthrough with you before the remaining balance is paid.

Five concrete demolition risks to avoid

The wrong section gets broken

Breaking too close to brick, a foundation or an attached step can leave more repair work than the original concrete problem.

The price misses hidden conditions

Thick sections, rebar and buried rubble can affect removal. A vague quote leaves room for charges nobody discussed.

Debris has no clear way out

A tight side yard or laneway-only property can slow the work if hauling and access were not considered before the crew arrives.

Dust and vibration reach nearby areas

Concrete breaking can affect planting, walls and shared access. Without a protection plan, the cleanup becomes somebody else's problem.

The site isn't ready for the next trade

Loose pieces and leftover waste can delay a new porch, patio, walkway or excavation work after the demolition is finished.

Services

Concrete demolition scopes, managed in Toronto

The right scope depends on the failed area, its thickness, access and what is planned next. Toronto freeze-thaw cycles can lift or crack exterior concrete, so we assess the visible condition before pricing. Where applicable, we confirm requirements on site and coordinate excavation through subcontractors under Antex project management.

Porch and step removal

For cracked or separating entrance concrete before a new build. The removal limits are checked against nearby brick and the house.

Walkway and patio removal

For heaved, sunken or broken exterior surfaces. We review the route for removal before setting the scope.

Slab removal

For a failed pad or slab blocking the next project. Concrete demolition and removal is scoped around access and waste handling.

Selective concrete removal

For one damaged section that may not require full replacement. Residential concrete removal starts with marking what remains in place.

Pool-area concrete removal

For concrete pool removal around a changing backyard layout. We inspect access and coordinate related excavation when required.

How concrete demolition works in Toronto

The job starts with the failed concrete, not a sales pitch. We visit the property, measure the area by laser and look at thickness, condition, reinforcement where visible, access and the surfaces that need protection. Then we send an itemized estimate within one to two business days. It separates labour and materials, is valid for two weeks, and nothing is ordered or scheduled until you approve it. For concrete demo and removal, we set the removal limits and waste route before work begins. Excavation is delivered through Antex subcontractors under our project management when the scope needs it. During the work, nearby floors, walls and planting are covered, dust is kept down and waste is removed. Your project manager gives a daily update, checks the completed area and walks it with you before the final 10% payment.

Measure the break area, then price it

We measure on site because slab thickness, access and attached surfaces can change the scope. You get an itemized estimate before approving the work.

Set access and removal before breaking

We confirm the waste route, protection needs and removal limits. Related excavation is completed by subcontractors under Antex project management.

Clear the area and walk it with you

Waste is carted away, dust is kept down and protected areas are uncovered. Your project manager checks the work with you at the final walkthrough.

Projects

Demolition Scope, Clearly Defined

These completed project examples show how demolition scopes can be matched to the concrete element, access conditions and material-removal needs. Each configuration identifies the existing structure, where the work took place and the circumstances that led to removal.

Testimonials

Concrete demolition reviews in Toronto

Homeowners appreciate clear planning and steady communication from the first measurement through handover.

0 %
Client Satisfaction
0 +
Projects Completed

Wonderful experience. Antex team installed our glass shower enclosure and it looks great. Service was fast without sacrificing quality.

James R Property Developer
WHY WE ARE DIFFERENT

Clear scope beats a vague demolition promise

Anyone can hang a panel of glass. Antex is different in four ways that show up on your invoice, your calendar, and your final inspection.

We inspect before pricing

Laser measurement and an on-site access check give the estimate a defined removal area, rather than a phone guess.

Measurement

The estimate shows the scope

Labour and materials are split out in an itemized estimate held for two weeks. It moves only when scope or materials change.

Pricing
One contact manages the job

One project manager stays with the work from first visit to final walkthrough. You receive a progress update at each working day's end.

Accountability
Replacement work is documented

When a replacement installation is included, its labour workmanship warranty is written into the Construction Agreement. Manufacturer warranties on supplied materials are passed through.

Written coverage
How We Work

From failed concrete to a clear, usable area

You should know what is being removed, what is protected and when the area will be ready for the next step. The process gives you a written scope, daily contact and a final check, without guessing on demolition day.

1

Assess and quote

We inspect the damaged concrete, measure the removal area and review access, visible reinforcement and nearby surfaces. Within one to two business days, we provide an itemized estimate valid for two weeks. No work is approved at the door.

2

Plan removal and access

After approval, we set an approximate work date and a written timeline where one applies. We call if that date moves. If the project needs excavation, Antex coordinates subcontractors under its project management.

3

Remove and hand over

Nearby floors, walls and planting are covered, dust is kept down and waste is carted away. Your project manager checks the cleared area with you at the final walkthrough. The remaining 10% is paid after that walk.

Book concrete demolition measured right the first time

If a cracked slab, porch or walk is blocking the next project, book a free on-site measurement in Toronto or across the GTA. We'll assess the removal area and access, then send an itemized estimate within one to two business days. There's nothing to sign during the visit, and nothing moves forward until you approve the scope.